Penerangan
To constantly improve the management system by virtue of the rule of ,sincerely, good faith and quality are the base of enterprise development ,, we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for pad getah silikon tembakan besar,pad getah silikon yang jelas untuk perabot,pad getah silikon tahan panas, kami mengharapkan kerjasama yang lebih erat dengan pelanggan luar negara berdasarkan faedah bersama. Jangan ragu untuk menghubungi kami untuk maklumat lebih lanjut
Automatic Flat Heat Transfer MachineSpesifikasi Mesin
Nombor model:AY-308A
Jenis:percetakan pemindahan haba
Gred Automatik:separa automatik
Maks. Kawasan Setem:300MM(W)
Maks. Height Of Workpiece:400MM
Min. Bucket Diameter:150MM
Stamping Stroke:80MM
Kelajuan Percetakan:30-40pcs/min
Temp Stamping.:(RT)0℃ ~ 399 ℃
Stamping Pressure:200-300KG
Nilai Voltan:AC220V/50Hz
Kuasa Mesin:3500W
Jaminan:13bulan selepas berlayar
Aftersale Service:Ada
Warna disesuaikan:Ada
Berat:3500W
Pembungkusan:Kes poli kayu
Saiz Mesin:1500*1100*1900MM
Saiz Pembungkusan:1700*1300*2200MM
Jenama Bahagian Utama
TIADA. | Nama Bahagian | Jenama | Tempat |
1 | Silinder Udara Naik | Jiekaidi | Tanah Besar |
2 | Termostat | 3A | China & Amercan |
3 | Silinder Pallet | Sanhuan | Tanah Besar |
4 | PLC & Komputer | Taida | Taiwan |
5 | Rubber Moter | Jinyan | Tanah Besar |
6 | Suis Photoelectric | Yangming | Taiwan |
7 | Motor Penggulung | Zhikong | Tanah Besar |
8 | Solenoid Valve | Xingong | Taiwan |
9 | Magnetic Powder Motor | Jinyan | Tanah Besar |
Ciri Mesin
1) The machine uses electronic cam three-axis synchronization.
2) Can set 5 different bucket specifications,and preserve.
3) Imported PLC systerm,easy to control and with long use life.
4) Winder film use progressive motor,mark sensor positioning.
5) Winder speed and principal axiss are adjustable.
6) Machine stamping pressure using pneumatic to Drive.
7) Can set 5 different bucket specifications,and preserve.
8) Servo motor to drive.
9) Bucket taper is adjustable.
10) Magnetic powder motor control tension.
11) Widely used for products with mult specifications,and 360° print and full pattern.
12) Working principle: depend on frame whirligig to position and printIa mematuhi prinsip ,jujur, rajin, berdaya usaha, inovatif, untuk membangunkan produk baru secara berterusan. Ia menghormati pelanggan, kejayaan sebagai kejayaan sendiri. Let us develop prosperous future hand in hand for Automatic Flat Heat Transfer Machine, With the aim of ,compete with good quality and develop with creativity, and the service principle of ,take customers, demand as orientation ,, kami akan dengan bersungguh-sungguh menyediakan produk dan perkhidmatan yang baik untuk pelanggan domestik dan antarabangsa.
-
-