ຄໍາອະທິບາຍ
To constantly improve the management system by virtue of the rule of ,sincerely, good faith and quality are the base of enterprise development ,, we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for ແຜ່ນຢາງຂະ ໜາດ ໃຫຍ່ຊິລິໂຄນສັກ,ແຜ່ນຢາງຊິລິໂຄນທີ່ຈະແຈ້ງ ສຳ ລັບເຟີນິເຈີ,ແຜ່ນຢາງຊິລິໂຄນທົນທານຕໍ່ຄວາມຮ້ອນ, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more detail
Automatic Flat Heat Transfer MachineMachine Specifications
ຈຳ ນວນຕົວແບບ:AY-308A
ປະເພດ:ການຖ່າຍໂອນຄວາມຮ້ອນ
ເກຣດອັດຕະໂນມັດ:semi-auto
ສູງສຸດທີ່ເຄຍ. ຄວາມອຸດົມສົມບໍລິເວນ:300MM(W)
ສູງສຸດທີ່ເຄຍ. ຄວາມສູງຂອງ Workpiece:400MM
Min. Bucket ເສັ້ນຜ່າສູນກາງ:150MM
ສະແຕັມ Stroke:80MM
ຄວາມໄວການພິມ:30-40pcs/min
ສະແຕມ Temp.:(RT)0℃ ~ 399 ℃
ຄວາມກົດດັນຂອງສະແຕມ:200-300ກິໂລກຣາມ
ແຮງດັນໄຟຟ້າອັດຕາ:AC220V/50Hz
ພະລັງງານເຄື່ອງຈັກ:3500W
ຮັບປະກັນ:13ເດືອນຫຼັງຈາກທີ່ກໍານົດໄວ້ sail
Aftersale Service:ມີ
ສີຕາມໃຈມັກ:ມີ
ນໍ້າ ໜັກ:3500W
ການບັນຈຸ:ກໍລະນີໄມ້ອັດ
ຂະ ໜາດ ເຄື່ອງ:1500*1100*1900MM
ຂະ ໜາດ ບັນຈຸ:1700*1300*2200MM
ຍີ່ຫໍ້ພາກສ່ວນຕົ້ນຕໍ
ບໍ່. | Parts Name | Brand | Place |
1 | Rise Air Cylinder | Jiekaidi | Mainland |
2 | Thermostat | 3A | ຈີນ & Amercan |
3 | Pallet Cylinder | Sanhuan | Mainland |
4 | ປກສ & Computer | Taida | Taiwan |
5 | Rubber Moter | Jinyan | Mainland |
6 | Photoelectric Switch | Yangming | Taiwan |
7 | Winder Motor | Zhikong | Mainland |
8 | Solenoid Valve | Xingong | Taiwan |
9 | Magnetic Powder Motor | Jinyan | Mainland |
ຄຸນນະສົມບັດຂອງເຄື່ອງຈັກ
1) The machine uses electronic cam three-axis synchronization.
2) Can set 5 different bucket specifications,and preserve.
3) Imported PLC systerm,easy to control and with long use life.
4) Winder film use progressive motor,mark sensor positioning.
5) Winder speed and principal axiss are adjustable.
6) Machine stamping pressure using pneumatic to Drive.
7) Can set 5 different bucket specifications,and preserve.
8) Servo motor to drive.
9) Bucket taper is adjustable.
10) Magnetic powder motor control tension.
11) Widely used for products with mult specifications,and 360° print and full pattern.
12) Working principle: depend on frame whirligig to position and printIt adheres to the tenet ,Honest, industrious, enterprising, ນະວັດຕະ ກຳ, to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for Automatic Flat Heat Transfer Machine, With the aim of ,compete with good quality and develop with creativity, and the service principle of ,take customers, demand as orientation ,, we will earnestly provide qualified products and good service for domestic and international customers.
-
-