기술
기계 사양
모델 번호:AY-308A
유형:가열 전사 인쇄
자동 급:반자동
최대. 스탬핑 지역:300MM(W)
최대. 워크의 높이:400MM
Min. 버킷 직경:150MM
스탬핑 스트로크:80MM
인쇄 속도:30-40PC / 분
온도를 각인.:(RT)0℃ ~ 399 ℃
스탬핑 압력:200-300킬로그램
속도 전압:AC220V / 50Hz
기력:3500W
보증:13세트 항해 후 개월
판매 후 서비스:유효한
사용자 정의 색상:유효한
무게:3500W
포장:합판 케이스
기계의 크기:1500*1100*1900MM
포장 크기:1700*1300*2200MM
주요 부품 브랜드
아니. | 부품 이름 | 상표 | 장소 |
1 | 에어 실린더 상승 | Jiekaidi | 본토 |
2 | 서머 스탯 | 3에이 | 중국 & 있는 Amercan |
3 | 팔레트 실린더 | Sanhuan | 본토 |
4 | PLC & 컴퓨터 | Taida | 대만 |
5 | 고무 엔진 | Jinyan | 본토 |
6 | 광전 스위치 | 양명 | 대만 |
7 | 와인 모터 | Zhikong | 본토 |
8 | 솔레노이드 벨브 | Xingong | 대만 |
9 | 마그네틱 파우더 모터 | Jinyan | 본토 |
기계 기능
1) The machine uses electronic cam three-axis synchronization.
2) Can set 5 different bucket specifications,and preserve.
3) Imported PLC systerm,easy to control and with long use life.
4) Winder film use progressive motor,mark sensor positioning.
5) Winder speed and principal axiss are adjustable.
6) Machine stamping pressure using pneumatic to Drive.
7) Can set 5 different bucket specifications,and preserve.
8) Servo motor to drive.
9) Bucket taper is adjustable.
10) Magnetic powder motor control tension.
11) Widely used for products with mult specifications,and 360° print and full pattern.
12) Working principle: depend on frame whirligig to position and print
-
-