기술
경쟁력있는 가격에 관해서, 우리는 당신이 우리를 이길 수있는 모든 것을 찾고있을 것이라고 믿습니다.. 우리는 그러한 가격에서 그러한 품질에 대해 우리가 가장 낮다는 것을 절대적으로 확실하게 말할 수 있습니다. 거물 실리콘 고무 패드,가구 명확한 실리콘 고무 패드,내열성 실리콘 고무 패드,사양 및 요구 사항을 보내주십시오., 또는 질문이나 질문이 있으시면 언제든지 저희에게 연락하십시오..
2018 factory manufacturer lanyards with heat transfer printing lanyard logo machine기계 사양
모델 번호:AY-308A
유형:가열 전사 인쇄
자동 급:반자동
최대. 스탬핑 지역:300MM(W)
최대. 워크의 높이:400MM
Min. 버킷 직경:150MM
스탬핑 스트로크:80MM
인쇄 속도:30-40PC / 분
온도를 각인.:(RT)0℃ ~ 399 ℃
스탬핑 압력:200-300킬로그램
속도 전압:AC220V / 50Hz
기력:3500W
보증:13세트 항해 후 개월
판매 후 서비스:유효한
사용자 정의 색상:유효한
무게:3500W
포장:합판 케이스
기계의 크기:1500*1100*1900MM
포장 크기:1700*1300*2200MM
주요 부품 브랜드
아니. | 부품 이름 | 상표 | 장소 |
1 | 에어 실린더 상승 | Jiekaidi | 본토 |
2 | 서머 스탯 | 3에이 | 중국 & 있는 Amercan |
3 | 팔레트 실린더 | Sanhuan | 본토 |
4 | PLC & 컴퓨터 | Taida | 대만 |
5 | 고무 엔진 | Jinyan | 본토 |
6 | 광전 스위치 | 양명 | 대만 |
7 | 와인 모터 | Zhikong | 본토 |
8 | 솔레노이드 벨브 | Xingong | 대만 |
9 | 마그네틱 파우더 모터 | Jinyan | 본토 |
기계 기능
1) The machine uses electronic cam three-axis synchronization.
2) Can set 5 different bucket specifications,and preserve.
3) Imported PLC systerm,easy to control and with long use life.
4) Winder film use progressive motor,mark sensor positioning.
5) Winder speed and principal axiss are adjustable.
6) Machine stamping pressure using pneumatic to Drive.
7) Can set 5 different bucket specifications,and preserve.
8) Servo motor to drive.
9) Bucket taper is adjustable.
10) Magnetic powder motor control tension.
11) Widely used for products with mult specifications,and 360° print and full pattern.
12) Working principle: depend on frame whirligig to position and printWe are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for 2018 factory manufacturer lanyards with heat transfer printing lanyard logo machine, 모두가 미래의 비즈니스 관계 및 상호 성공을 위해 저희에게 연락하는 것을 생업에서 우리는 새롭고 오래된 고객을 환영합니다.
-
-